IPG Raycus Max Metal Parts Fiber Laser Marking Machine
(Model: PEDB-400D)
Contact: Alice
Product Introduction
The laser etching machine for metal adopts international most advanced technology and the fiber laser source's lifetime can reach 100,000 hours, 8-10 years without any consumables and maintenance.
This laser etching machine for metal with PC for metal is the best choice for the customers who have special requirements to the smallest & finest laser beam and character. The software has already been installed and the parameter is settled before delivery. Once recieved, the laser etcher could work directly without data adjustment.
1. Best Marking Effect: the laser beam of fiber laser etching machine for metal is fine and thin. Laser etching steel can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
2. Deep Marking: Perfect Laser fiber laser etching machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3. Higher Accuracy: The laser etching machine for metal can reach unto 0.001mm precision, while diode only 0.01mm.
4. 10 Years Long lifetime: fiber laser etching machine use the fiber laser source made by Germany IPG technology, the lifetime can reach 100,000 hours, so the machine can be used for 8-10 years.
5. No consumables:The laser etching machine for metal can be used for metal marking for 8-10 years without any consumables.
6. No need to adjust the laser path.
7. Free of Maintenance.
8. Use Integrated Air Cooling.
9. Low Power Consumption: low cost, only 0.5kw/hour.
10. Small and compact: the volume of Perfect Laser's fiber laser marking machine is small, only 0.15 M3.
Samples
Technical Data
| PEDB-400D Floor type |
| Laser source |
MAX, Raycus, Mapo and IPG |
| Marking area |
110*110mm/ 175*175mm /200*200mm |
| Polarization |
random |
| Q-switched operation |
| Output power adjustment range |
10%-100% |
| Nominal average output power W |
10W/20W/30W/50W |
| Central emission wavelength |
1060-1070 nm |
| Emission Bandwidth (FWHM) |
< 10 nm |
| Long-term average power instability |
< 5% |
| Pulse width, (FWHM) |
100 ns |
| Laser switching ON time |
180 μ sec |
| Laser switching OFF time |
180 μ sec |
| Pulse Repetition Rate* kHz |
20-80 kHz |
| Energy per pulse (PRR = 20 kHz) |
0.95 mJ |
| Typical beam quality, M2 |
< 1.8 |
| Output fiber delivery length |
3m |
| Operating voltage |
220V |
| Max. Power consumption |
600W |
Details
Our Serivcie
1. All of our machine will be full-checked by our quality control department before the shipment. We make sure that customers will be get good products from us. and all of our machine with a12 months quality guarantee period.
2. We will enclose an "Instruction Book", "Operation Manual" and "Training Video" (in English version) to you, which is easily understood and handle by the customer.
3. We will offer plenty of online supports, by email, video, telephone and fax.
4. Our engineer can make a door-to-door instruction training service.
Contact Us
Perfect Laser Co.,Ltd.(China)
Contact: Alice / Sales Manager
){kind=link}