Pen/ PVC / steel Fiber laser marking machine price
Perfect Laser's Fiber Laser Marking Machine adopts international most advanced technology and the laser source is fiber with Germany IPG technology, lifetime can reach 100, 000 hours, 8-10 years without any consumables and maintenance. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam. This is the best choice for the customers who have special requirements to the smallest & finest laser beam and character.
1. Best Marking Effect: The laser beam of fiber laser is fine and thin. It can provide the best marking effect among all the laser machine machines. Especially good in smallest character marking, such as mark on IC chip.
2. Deep Marking: Perfect Laser's Fiber Laser Marking Machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3. Higher Accuracy: Fiber laser can reach unto 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime: We used the fiber laser module made by Germany IPG technology, the lifetime of the fiber laser device is 100, 000 hours, so the machine can be used for 8-10 years.
5. No consumables: Fiber laser machine can be used for 8-10 years without any consumables.
6. No need to adjust the laser path.
7. Free of Maintenance.
8. Use Integrated Air Cooling.
9. Low Power Consumption: Low cost, only 0.5kw/hour.
10. Small and compact: The volume of Perfect Laser's Fiber Laser Marking Machine is small, only 0.15 M3.
Application materials: Perfect Laser's Fiber Laser Marking Machine is widely for stainless steel marking, carbon steel marking, iron marking, aluminum marking, copper marking, brass marking, anodized and coated materials marking, etc., and non-metallic such as nylon marking, ABS/PVC/PC board marking, hard plastics marking, rubber marking, resin marking, ceramic marking etc. In the industries of electronic and communication products, IC products, electric lines, cable computer components and electric appliance,
Need Mire Information, please contact with Perfect Laser now>>>>>
|Machine Type||Fiber Laser Marking Machine|
|Laser Sourse||PEDB-400 10W|| PEDB-400 20W|
|IPG Series||Pulsed, High Energy Ytterbium Fiber Lasers|
|Mode of operation ||Pulsed|
|Output power adjustment range||10%-100%|
|Nominal average output power W||10W||20W|
|Central emission wavelength ||1060-1070 nm|
|Emission Bandwidth (FWHM) ||< 10 nm|
|Long-term average power instability||< 5%|
|Pulse width, (FWHM) ||100 ns|
|Laser switching ON time ||180 μ sec|
|Laser switching OFF time ||180 μ sec|
|Pulse Repetition Rate* kHz ||20-80 kHz|
|Energy per pulse (PRR = 20 kHz) ||0.95 mJ|
|Typical beam quality, M2 ||< 1.8|
|Output fiber delivery length ||3m|
|Operating voltage ||220V|
|Max. Power consumption ||600W|