1-30mm Thickness Metal Steel Sheet Cutting CNC Plasma Cutting Machine 3000X1500mm
CNC Flame Cutting can cut easily-oxidized metal, such as mild steel, carbon steel 3~200 mm with common precision. It is a method of cutting ferrous metals in which the metal is heated by a torch to about 800 degree and is oxidized by a stream of oxygen from the torch.
CNC Plasma Cutting can cut both hardly-oxidized metal and easily-oxidized, such as stainless steel, brass, aluminium, zinc 1~60mm. Actually, CNC plasma cutting system is CNC + plasma power supply. It is a process that is used to cut steel and other metals using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; At the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.
Flame And Plasma Cutting Machine Features:
1. Machine design simple.
2. Bench-gantry structure, welding after the vibration aging treatment to eliminate stress, so that in the long-term use of no deformation.
3. All mechanical drive system using rolling bearings and precision machining accuracy as 6 GB of precision gears mesh with the rack
4. Planetary reduce drive system, its input and output error of only 16 arc minutes, at the same time, in the horizontal and vertical structure of the gear drive, an increase of automatic clearance compensation device so that it can accurately drive the structure of the implementation of the directives issued by the CNC.
5. Take the initiative to end beam: Vertical track for the introduction of automatic clamping device-oriented structure and there is no eccentric clamping structure, relying on automatic detachable power-oriented structure to make it two. In the track combined with the smooth running of the department will not have a wheel clamp tight or lax-phenomenon.
6. All the equipment look to see, such as steel, screws, using black or chrome handle.
7. Spray machine to use more advanced types of paint, the color demand on users.
| Product Name |
CNC Flame Cutter
/ Plasma Cutter |
CNC Flame Cutter
/ Plasma Cutter |
CNC Flame Cutter
/ Plasma Cutter |
| Model No. |
PE-CUT-A2 |
PE-CUT-A3 |
PE-CUT-A4 |
| lateral rail span |
6000mm |
4000mm |
3000mm |
| effective incise width |
5200mm |
3200mm |
2000mm |
| length of vertical rail |
6000mm |
6000mm |
3000mm |
| effective incise length |
4800mm |
4800mm |
2500mm |
| NC cutting |
1 set |
1 set |
1 set |
auto-adjusting height system
of plasma arc voltage |
1 set |
1 set |
1 set |
auto-adjusting height system
of capacitance |
1 set |
1 set |
1 set |
| controlled switch |
some |
some |
some |
| lifting height of cutting |
≤ 200mm |
≤ 200mm |
≤ 200mm |
| cutting speed |
0-3500mm/min |
0-3500mm/min |
0-3500mm/min |
| roughness of cutting surface |
Ra≤ 12.5μ m |
Ra≤ 12.5μ m |
Ra≤ 12.5μ m |
| driving system |
three-phase AC motor dual-driving |
three-phase AC motor dual-driving |
three-phase AC motor single-driving |
Contact
Lucy
--------------------------------------------------------------------------------------
Perfect Laser Co., Ltd. (China)
Add: HengRuichuangzhi Technology Park, No.13 YangQiaohu Road, Jiangxia District, Optical Village, Hubei, China(430200)
Audited Supplier 
){kind=link}
){kind=link}